Meeting 1: 1/10/19
Location: lab (room 224)
Time: 11:10 am
Attendees: Megan, Devon, Michael, Ryan
We discussed the basics of the project and how to program the Arduino Nano.
No upcoming tasks were discussed.
Meeting 2: 1/17/19
Location: lab (room 224)
Time : 11:10 am
Attendees: Megan, Devon, Michael, Ryan
We completed the team working agreement, AEV checklist, and the policy. We made sure we had everything needed to build the AEV. We also learned to run a reflectance sensor test. The AEV was built using the kit provided and code was uploaded to the AEV.
No upcoming tasks were discussed.
Meeting 3: 1/31/19
Location: lab (room 224)
Time: 11:10 am
Attendees: Megan, Ryan, Devon, Michael
We tested the performance analysis program and during that we learned how to use it. We also ran another reflectance test and some sample coding to make sure everything worked.
We discussed meeting in two weeks to decide on a design for our grant proposal on Wednesday.
Meeting 4: 2/7/19
Location: lab (room 224)
Time: 11:10 am
Attendees: Megan, Ryan, Devon, Michael
We ran a reflectance sensor test. We learned to use the data extraction tool on the AEV. We imported this data into MATLAB to create a variety of plots for the website.
We discussed a possible meeting next week to determine the design for our AEV grant proposal.
Meeting 5: 2/11/19
Location: room 308
Time: 10:20 am
Attendees: Megan, Ryan, Devon, Michael
We discussed all of our designs we made for the AEV and decided what we did and didn’t like about all of them. We did not get around to making an official design based on this information, but we have a better idea about where we want to go with it. We will likely make more concrete decisions about the design as the project progresses and becomes more clear.