Budget

Description

Quantity

Cost Per Item

Angle Bracket, 1×1″ 2×2 hole

1

$                 1.00

Axle Rod, 8

1

$                 1.48

Washer, .75

8

$                 0.29

Double Bent Strip

2

$                 0.79

Double Angle Strip 3.5″x.5″ 1x7x1 hole

1

$                 0.90

Double Angle Strip 5.5″x.5″ 1x11x1 hole

2

$                 1.92

Screwed Rod, 3

4

$                 0.96

Fuel Crank Mechanism (3D printed part)

1

$                 2.88

1/4″ MDF (Engineered Plywood), 12″ x 12″ sheet

1

$                 4.30

DuBro Wheel Adapter for IGWAN shaft – only for 2.5 inch wheels

6

$                 1.00

3D printed chassis mount for IGWAN motors

3

$                 2.50

IG-22 (Igwan) motor

2

$              25.00

Futaba Servo Motor (with Hardware)

2

$              10.00

Terminal block for continuous rotation motors

2

$                 0.05

DuBro Wheel Adapter, Shaft Mount (with 1 SCREW16) – only for 2.5 inch wheels

2

$                 1.00

POPSICLE STICK OR TONGUE DEPRESSOR

2

$                 0.05

6 Pack #8 Screws (.75″), Nuts, Washers

4

$                 0.20

6 Pack #6 Screws(1.5″), Nuts, Washers

1

$                 0.20

Long Male Header Strip (16 pin)

1

$                 0.50

Velcro strips sold by inch length

2

$                 0.15

Shaft Lock Collar w/set screw (fits erector axle) (with 1 SCREW15)

4

$                 0.35

DuBro 250T 2.5″ Wheel (Single)

4

$                 2.60

4″ tie wraps (zip ties)

2

$                 0.05

Plastic spoons

2

$                 0.01

Paper

1

$                 0.01

Ping Pong Paddle (2.5″ diameter)

1

$                 0.15