2/27/14 – Check List

Check List

1. Tighten all screws, particularly ones in higher stress areas, like the forklift.
2. Right Optosensor in port input pin 1_0.
3. Left Optosensor in port input pin 2_0.
4. Left Motor in port motor 0.
5. Make sure wires in Left Motor are firmly attached.
6. Right Motor in port motor 3.
7. Make sure wires in Right Motor are firmly attached.
8. Right Servo in port servo 0.
9. Left Servo in port servo 5.
10. IR Beacon in port servo 7.
11. Back Servo in port servo 3.
12. CdS Cell in port input pin 0_0.
13. Make sure all wires are firmly attached, and that all inputs are fully in the Proteus.