Check List
- Tighten all screws, particularly ones in higher stress areas, like the forklift.
- Right Optosensor in port input pin 1_0.
- Left Optosensor in port input pin 2_0.
- Left Motor in port motor 0.
- Make sure wires in Left Motor are firmly attached.
- Right Motor in port motor 3.
- Make sure wires in Right Motor are firmly attached.
- Right Servo in port servo 0.
- Left Servo in port servo 5.
- IR Beacon in port servo 7.
- Back Servo in port servo 3.
- CdS Cell in port input pin 0_0.
- Make sure all wires are firmly attached, and that all inputs are fully in the Proteus.